F350 rear blocks

[96blowncobra]

Long story short I leveled the front now I need to level the back. Is there any alternative to the f350 blocks that I can't seem to find any where? If you have some you would like to sell please let me know.

 

[johnholman]

Check out Precision Metal Fabrication. They are a vendor on here.

 

[Zmann]

or keep your block and put a 1 inch thick 3 wide 6 long block under the spring pack

and install it with a new center pin to keep it in place ( tip= radius or relieve the sharp edges that contact the springs at the ends )

here is the concept
http://www.4wheeloffroad.com/techarticles/suspension/131_0601_suspension_add_a_leaf/

 

[96blowncobra]

Like the 1" spacers on eBay? I'd rather them factory but the dirty diaper look isn't for me.

 

[Zmann]

IDK about the ebay spacers? that s why I gave you the link

you can DIY this style for little $ if money isn't a big deal Sunrise ford will sell you OEM

and you may need the ubolts also .. but you know that