Reply to thread

Message: [QUOTE="96OBS, post: 637406, member: 10185"] Okay guys I put a flatbed on my 96 f250. Well I done my best to re do the filler neck so it would fill right. Well I took and cut a hole on the bed and ran the cap on top of the bed. I took and cut the outer metal tube a little exposing the inner little rubber tube. I just hooked it to the original spot where you put the cap on. Well now I've got a water in fuel light and finally figured out I cut the vent tube and water is getting in through it and need to re do it. So can I just buy some hose and clamp it back to the rest of the metal vent to to replace it? And where can I run my filler neck where it won't be on top of the bed? I don't want all the problems of filling the tank but I've gotta do something.... [/QUOTE]

Verification

Random media

2011-07-21_18-41-57_912

NL64PSCSK

KC Turbo Stage I w/10 Vane Custom turbo

!sicpsd

2011-07-06_22-25-01_636

baja_rack_4_PIC

Minotaur Parameters

Beyma Studio 8 ohm drivers right channel.

68F7D765-473B-49B2-A342-6E677E43959D

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Yesterday at 8:05 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

projectford

Total: 739 (members: 1, guests: 738)

Top