Reply to thread

Message: [QUOTE="PrecisionEngine, post: 1476109, member: 8346"] If your version of Forscan is working, a variable change should correlate to an immediate reboot of the ACM. When I first tried to access my ACM, i could not find the module with forscan. I knew it was there because there was as-built data for it. At first, i thought it was my OBDII to bluetooth connector. In conversation with ForScan, we ruled that out. In the process of figuring out why I could not see the ACM, FORscan sent me another FORscan version. I uploaded it. Now i found the module, but any changes i made would not take. Finally, FORscan sent another version which finally made it possible to edit the ACM. Using the last version they sent, when I make a change to the ACM, KOEO, the unit immediately shuts down, reboots, and the change is audible. Meaning, If i select 2-channel output - I loose two channels. you can get a cheap scope to use with your laptop, google it... they're not the greatest, but it's enough to check for 4v output at 30-50hz at near max volume. [/QUOTE]

Verification

Random media

photo_4_1

263

IMG00101-20100427-1510

front_suspension

step_8-1

Front End Shot

truck_on_road

Screen_shot_2012-01-29_at_8_36_53_AM

7_3

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

fastersteve

Total: 537 (members: 1, guests: 536)

Top