Reply to thread

Message: [QUOTE="zilla68, post: 42779, member: 1410"] Ok, I had a leak in the valley, and thought what the hell, truck has 175k on it, I'll do a pump and reoring the fuel bowl. My questions are: 1). to remove the heater, do I just leave it unplugged and I'm good to go, or remove the whole heater assembly and just bend the little tab up that is sticking into the bowl so it doesn't touch anything? 2). There was a TON of crap in there, the diesel was clear, but look at the pictures, can I just clean it out with carb cleaner and I'm good to go? 3). To clean the fpr filter, do I just blast it with cleaner also? I'm assuming I take off the 2-10mm screws and remove it. I bought everything from dieselorings so I'm hoping all those orings for the entire bowl are in the kit. 4). You'll notice in one of the pics there is a small round button looking thing that was in the bottom of all the crap, any idea what it is or where it came from? Thanks for the help [/QUOTE]

Verification

Random media

Justin and I

13_white_headlights_1

A_M1

IMG_20130322_200836_402

IMG_20130106_154236

Ennis_2011

IMG_20130401_210500_864

garrett

My '04 6Leaker

Latest posts

T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Yesterday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- May 22, 2025
6.4 Tech & FAQ

Members online

No members online now.

Total: 1,253 (members: 1, guests: 1,252)

Top