Reply to thread

Message: [QUOTE="TyCorr, post: 343303, member: 1451"] I did this repair two years ago. My Napa didnt have push lok. I used fittings and 1/4" coated steel line. I tried using hp fuel line and clamps. No.dice! It was about.5° out and the rubber wouldnt seal. I even tried it again by soaking.the rubber in hot water and heating the work with a heat gun. Reassembled and turned the key, sprayed diesel all over the wall of my shop. Fittings and hardline were the only solution that worked for me. They arent dependent on weather either. I replaced.the uppermost fitting on the dr side. @ the op, I completely agree with the option you chose. But Ive also been there and know when you need to get back on the road ordering shti like this is a waste of time. Plus.there is a 50% chance the parts monkey will order the right stuff. [/QUOTE]

Verification

Random media

2008 King Ranch motor work

photo_1

tow_truck_3

511-4-2

John Deere X728

20161028_080740

20130927_154557

Smokyred

SSL10001

Fire

Latest posts

I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Today at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Yesterday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

Total: 654 (members: 2, guests: 652)

Top