Reply to thread

Message: [QUOTE="Hotrodtractor, post: 321995, member: 25"] I'm going to disagree with you on that. If you are running a 10 micron filter - congrats that is now the clearance between your plunger and your barrel (or what you are allowing it to wear to). 10 micron is HUGE - especially when you look at the actual specs on a 10 micron filter with its actual filtering capabilities and efficiencies. 2 micron - I will run nothing other than a 2 micron even in racing apps. I would run a finer filtration if I could find one with a high enough flow rate, high enough efficiency rating, and it was cost effective. As the plunger and barrel clearances open up - it REALLY drops the efficiency of the injector off quickly. [/QUOTE]

Verification

Random media

IMAG0153

DSCN3278

New_Fuel_Sump_07

2012-03-27_15-11-26_387

New Tires 4

IMG_20140506_222559_903

2012-03-27_15-10-59_934

My 01 F-250 7.3l

Underside Truck Photos

ptm_front

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 904 (members: 0, guests: 904)

Top