Reply to thread

Message: [QUOTE="windrunner408, post: 448380, member: 1868"] I returned mine to the filler neck with my AD150 at first but then when I put the sump in, I pulled the filler neck T fitting out, replaced the filler neck hose, and ended up modifying my setup to use the 1/2in draw straw that also came with the kit as the air return port. I don't know if you have this or not but I would do what Chris said with using the OEM draw straw if you're using a sump. I would just pull the whole sending unit/draw straw/return line out and cut the factory draw straw near the top and stick it back in. JMO of course. Hope it helps. [/QUOTE]

Verification

Random media

Pink_dance-taco

Memorial_11_043

Ben's 96

Memorial_11_038

97 F-250

Screenshots 2

my truck

Dyno603b

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

INFRNL

Total: 651 (members: 1, guests: 650)

Top