Reply to thread

Message: [QUOTE="CSIPSD, post: 656926, member: 200"] Bed mounted L tank is your best bet. Tanks can be had all the time on CL for $250-$500... Then if it doesnt have a drain on the drivers side then install one. Put a ball valve there and run a hose from there thru the bed down by the filler neck. Drill a hole in the filler neck about 10" back from the cap (give or take a few) and weld in a fitting, run 3/8" fuel hose from the tank in the bed to the filler neck. Just that easy. It will gravity feed the main truck tank until the pressure between the cap and the port location stops it. I have not filled the main tank in years, just the L tank in the bed. I never turn the ball valve off unless I need to drop the tank for one reason or another. [/QUOTE]

Verification

Random media

023F0706-529B-4A15-AFAC-195CB67B79E8

hx40 over 38r

i/c pipe

DSCF3420

DSCN8402

pistons

Capone

step_15

013

flow_thru_2

stacks3

Latest posts

S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Today at 12:26 AM
6.7 Tech & FAQ
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Yesterday at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Tuesday at 9:10 PM
7.3 Aftermarket
new build input welcomed
- Latest: btoler4th
- Tuesday at 3:37 PM
6.4 Aftermarket

Members online

No members online now.

Total: 733 (members: 2, guests: 731)

Top