Reply to thread

Message: [QUOTE="Extended Power, post: 112837, member: 898"] The bolts I got to bolt it down on the inside of the manifold were too long...so when I torqued them down, they were bottomed out... Put everything back together...started pouring in the coolant...and had a puddle on the floor.... Had to pull everything back off, and buy shorter bolts. The coolant was coming from the connection between the manifold and the front cover...at the donut...so since there is no more water needed to go into the intake...I solved the problem for good. I guess it's more of a "Check that the bolts are not too long" issue... And they weren't ALOT too long...just enough to bottom out, and not snug everything down... I was worried about the tops not sealing on that cord o-ring stuff, so I applied a thin o-ring grease to them...and when I pulled the intake off, there was no evidence of any air leaks at all. [/QUOTE]

Verification

Random media

17_3

Blue Spring Upgrade

IMG_20130509_191906_562

OBS

new_rims

IMAG0329

2011-07-06_16-57-41_389

Picture_040

Yes thats a 6.0 dash

20141215_120010

456890_4064724424653_1889768556_o

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Today at 2:06 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

No members online now.

Total: 641 (members: 0, guests: 641)

Top