Reply to thread

Message: [QUOTE="kanuck15, post: 896338, member: 240"] Let me start from scratch so you know what I know. Truck came in with no fuel pressure, replaced the pump, replaced the fuel bowl (found a crack). while the fuel bowl was out I cleaned the screens on the FPR, replaced all the rubber hoses, checked all the fuel bowl harness wiring and rewrapped it. Then blew out the feed line from the selector valve to the pump. That brings me to where I am at now on the fuel side of things. After all of that there is still no pressure and weak flow out of the back of the pump. It will fill the fuel bowl just fine which makes me think its not a bad cam shaft lobe (ive been over almost every possibility out there). So I am going to try another new pump tomorrow [/QUOTE]

Verification

Random media

0091

97psd7

111247_12

side-1

20103

front_axle_swap

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 849 (members: 0, guests: 849)

Top