Reply to thread

Message: [QUOTE="6.0 Tech, post: 1550310, member: 23001"] Ok, so with both the control sides (small wires) disconnected off the glow plug relay they have continuity between them, without them touching the gpr? That typically means they’re shorted together. However, goofy **** happens in the pcm, so you should unplug the pcm when doing the continuity check. Also, ohm readings should always be taken on an unpowered circuit, otherwise it reads wrong. I would need to look at a wiring diagram to tell you which pins on the pcm are for the gpr. However, even with the screwy ohm readings, it could still be something not telling the pcm to turn the relay on. I don’t remember off the top of my head what that is, but I would guess it’s either iat, eot, or ect, or a combination of the 3 after it does a check to make sure one isn’t really off. (I can’t for the life of me figure out what one word I’m looking for to take the place of the 5 words I had to use on the description). Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

20180513_171405_Burst01

6_4Hopper

dustin

Truck pics.

Screen_shot_2012-01-29_at_8_42_51_AM

step_8

30098_1203722752143_1800846961_410279_3523261_n

My Toys

The wife taking the truck out for the first time..

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Thursday at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- May 9, 2025
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 633 (members: 0, guests: 633)

Top