Reply to thread

Message: [QUOTE="ascrap2003, post: 1383653, member: 25849"] Icp connector looks decent a lil dirty but not soaked, voltage at koeo was 0.25 & 14.8% duty cycle. A little over a volt on cold idle pressure make its all the way down to about 700psi and duty about 25% right around than 120 oil temp problem starts and psi goes to 1100-1400 and 35%-45% duty and starts missing/no power/throttle response When cold starting 40% - 60% duty and jumps to over 1000psi then settles down from there till problem starts. I'm trying to find out thru ford if truck already came with updated stc fitting "threaded" and will do sticks and check ipr or replace ipr. Before I messed with it truck was running a lil rough missing but not dying hard start some times but by 3rd try hot would start and was drive able. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

wreck2

17King1

08 center console painted meddium pebble to match my 06

raptorbfg

Duramax hauling grain truck

08 6.4 Parts

1st_gear_converter_lock

eleanor_part_two_77_

My truck

line_of_fire

IMAG00781

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Yesterday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current

Members online

pooter

Total: 347 (members: 1, guests: 346)

Top