Reply to thread

Message: [QUOTE="The Oiler, post: 23515, member: 1047"] Ok checked the other side to day and the same thing with the pressure vaules. So the next step I took was to hook the guage up to to the pump itself and it did the same thing. So the only thing I havent checked throughly is the lpop side and see how long it takes to build pressure. Also I have an Innova 3130 scan tool and every time I connect it to the pickup the truck will stall and the scanner will reset. Even with the key on and engine off it says that there is no data stored in the PCM. It wont pick up any DTC either. But if I plug in my SCT it will find codes. Also,I took out the Ts with Swamps tuning and it like to rev on its own when its cold. I disconected the TPS to see if it might be acting up but made no difference. [/QUOTE]

Verification

Random media

1004835_10151854838613974_45300355_n-1

bryanstruck

2011 F350 6" Pro Comp Stage 2

The Truck at Angler's Choice

8_LUG_Bragging_Rights_July_2012

SOIdelaynumbers

FB_IMG_1589252868933

FB_IMG_1524919712365

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 554 (members: 0, guests: 554)

Top