Reply to thread

Message: [QUOTE="mustube, post: 1001331, member: 10558"] If you buy a new header panel, the headlamps will bolt on. If you want to keep your 99-04 grille, you should do the cutting method. You will need: Header panel Head lamps Conversion harnesses speed nuts and bolts for attaching top of headlamp If you decide to cut, then you need everything above minus the header panel Here's a picture of what to cut (not my picture): [ATTACH=full]136411[/ATTACH] You will also need to drill the holes in the header panel for the upper headlamp attachment bolts, and you will see where to drill those after you cut and put the headlamp up to the truck, it will be 2 bolts per headlamp. I would buy the new header panel. By the time you are done cutting the holes, you could have the new header panel bolted on, and if you are also converting to an 05 grille, it will snap in right instead of needing to be zip tied or something. [/QUOTE]

Verification

Random media

amps

20160616_163009

08_xl_rear_right

461789_4064732464854_1209175407_o

67ic1

Ouch

08_xl_rear_left

P1000854

Duramax hauling grain truck

2011-09-04_15-14-48_529

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 896 (members: 2, guests: 894)

Top