Reply to thread

Message: [QUOTE="6.0 Tech, post: 1566708, member: 23001"] Cut pistons lower the compression ratio, and it will haze more at idle, especially when cold. I’ve got cut pistons in my truck, and when it’s cold here for Az, like 30-40 degrees, it looks like the streets on fire until it gets up to temp. The fact that it smells like fuel also leans toward it being compression related, as diesel needs heat to fire the fuel, lower compression equals less heat. And now that I said that, double check the glow plug system and make sure it’s working properly. Ohms should be 1 or less for each glow plug, and if you have a relay, should be relatively no voltage drop across it when it’s actuated, like probably less than .2v drop Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

my 97 PSD

05 lights

MSGR_PHOTO_FOR_UPLOAD_1540210354297_jpg_1540210357886

Hole_in_Piston_from_Top

eleanor_dash_3_

200c595f

photo3_zpsdec9636b

srt2

MPD 6.7 Ford Budget Kit box 2

IMAG0020

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

No members online now.

Total: 1,400 (members: 0, guests: 1,400)

Top