Reply to thread

Message: [QUOTE="B.A.D Performance, post: 1028888, member: 15363"] ok quick run down. just rebuilt this motor everything is new. on first fire up it was perfect no problems. drove it around maybe an hour or so. the next day drove it some more. let the truck idle for a minute to pop the hood and check for leaks. truck died and wouldnt restart. I have it narrowed down to a high pressure oil problem. base oil pressure gets up to 60psi oil resivoir is full with the scanner hooked up when hot it only builds 400psi at 90% so I tried unplugging the icp sensor. no change changed the icp sensor, no change cleaned the ipr no change changed the ipr pigtail no change brand new injectors. unplugged all injectors turned motor over. none were pissing oil. checked all 4 oil rail plugs under the valve covers. all where good. yet when the motor is stone cold it will start and purr like a kitten. idle at 530psi at 13%. then gets up to temp and icp drops and truck dies wont restart. im figuring if my stealth hpop was bad then the truck wouldn't run at all. any ideas would be greatly appreciated. I don't know what else to check [/QUOTE]

Verification

Random media

20170122_124732

First truck

iphone_pics_054

Big_Red15

IMG_20140803_231253

eleanor_dash_1_

'08 F250

New_Image54

798381_10151319132373434_1889678393_o1

screenshot

waxxxx

Latest posts

Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Jun 4, 2025
Suspension, Drive Train, and Tires

Members online

Antoniowpq

Total: 268 (members: 1, guests: 267)

Top