Reply to thread

Message: [QUOTE="B.A.D Performance, post: 1133251, member: 15363"] Heres the run down. I built my own gen3 style hpop setup using a halidex pump ran into a stock 17 degree hpop. Truck fired right up after install. Rough idle as expected from air in the system. So I let it idle about 5 minutes no problem. I revved it up one time let off the throttle it died and hasnt started since. Doesn't even try to start. Ipr only reaches 65% icp only reaches 275psi. Changed iprs new icp. All wiring looks good. Injector orings are perfect. Base oil pressure is perfect. Hpop resivoir fills. Im stumped ant ideas? Im leaning toward the stock hpop took a shiz [/QUOTE]

Verification

Random media

step_13

Hole_in_Piston_from_bottom

2012 f250 sagging

drive_side

rod1

Truck

IMG_20160731_162838682

5733

CCV_Delete

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Apr 23, 2025
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 1,158 (members: 0, guests: 1,158)

Top