Reply to thread

Message: [QUOTE="Powerstroke_fan, post: 590912, member: 10034"] When you shut the truck off you can hear the hp turbo shaft still spinning and making like a clicking noise, And i just bought it as a new center cartridge. The old hp turbo had fried oil caked all in it and looked really bad. it ate in the housing. Looks like it was from a lack of oil or excessive heat. But seeing how the lp side was perfect and i Didnt even need rebuilt but did anyway. It wouldnt be from a lack of oil seeing how the lp side was fine and i replaced the oil feed line anyway just play safe. So that leaves excessive heat. you will be driving on the highway 55 and it just starts wooshing really loud and pressure drops to 4 or 5 but its funny like i stated before, you can bump gas and it goes away and slowly drops again. and no mention of cleaning exhaust filter in dash. My AE also told me that the truck previosuly had high ash level in the dpf. But it was old code and wasnt and never became active. But ill get a video and post it in a little bit thanks for the help everyone. I really gotta get this fixed. [/QUOTE]

Verification

Random media

DSCF1710

2008 F250

Trans_Ports

Xmas_05a1_024

Screen_Shot_2014-06-04_at_8_45_50_PM

6_7_Ford_exploded_glow_plug_view

befor an after

17_5

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 878 (members: 0, guests: 878)

Top