Reply to thread

Message: [QUOTE="silverpsd_06, post: 713736, member: 1011"] Getting some of the same DTC's as before but i swapped in two known good injectors for the #3 #7 holes that were giving me all the trouble before. DTC's P0269- Cylinder 3 contribution P0281- Cylinder 7 contribution P0272- Cylinder 4 contribution P0303- Cylinder 3 misfire P2289- Injector Control pressure too high Engine off P0191- Fuel rail pressure sensor A range/ Performance I tried to do everything by the book and bled what air I could out of the fuel system. Does it just take a little while for these to straighten up once the system has been open? The miss does not get any worse like it was before it stays constant this time, but not nearly as obnoxious.. Did i miss something here?? Number 4 contribution and the rail pressure DTC's showed up after the swap. Any thoughts or ideas? It's about to make a trip to the stealership.. [/QUOTE]

Verification

Random media

MBRP DP

08 excursion

AWOL

c3007a16-1

1994 Ranger 361V

Misc_041

Glow Plugs

ex_heads

photo_21

1832140C-D87D-4562-BBE0-E67000873B1C

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 884 (members: 0, guests: 884)

Top