Reply to thread

Message: [QUOTE="02BigD, post: 782591, member: 96"] So, this morning started the truck and it was rougher idle than normal. Figured it was oil being tired as I am 200 miles over due for change and its always a little rough with the Gen3 in the morning. Oil is on the list for this weekend so no biggie. Truck sits at office for 6 hours, and I fire it up to warm up for me to leave. Starts right up, but rough idle again. Couple minutes later I come out and it's smooth. Ride 5 minutes home, leave it running and come out 10 minutes later all is well. Drive 4 minutes and shut it off for 5 minutes to go talk with client. Come out, no start. Wts- yes Tach - no movement ICP- scan gauge says no more than 350 psi Smoke - none Cranking is strong Wait 5 hours and just went up to try with the oil having cooled down and still no start with same symptoms. I am thinking cps swap in the morning... What say you? Thanks in advance. [/QUOTE]

Verification

Random media

Window_switch_front

Electric fuel

IMAG1096

15 superduty

Truck stereo powered by 6 McIntosh amplifiers @ 2,400 Watts in 4 ohms

798381_10151319132373434_1889678393_o

IMG_20130528_222533_853

wife & kids in the Bronco

IMG_20121128_082956

IMG_20110903_1824331

0208151604

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 305 (members: 0, guests: 305)

Top