Reply to thread

Message: [QUOTE="sirnunya, post: 261268, member: 3359"] [IMG]http://www.hidkitswarehouse.com/images/90049007.jpg[/IMG] I think this is what I had to do. This is the reasoning: "A common problem if your 9004 or 9007 does not light up stems from the problem that the 9004 and 9007 bulbs share the same harness but has different wiring. The manufacturer often substitutes one for the other. Check with the diagram to the right to see if your wiring matches the appropriate bulb. To change the wiring, insert a thin sharp object into the front of the harness, on top of the pin and push down a small metal tab while pulling lightly on the wire behind it. The metal pin should come out and you can move it to where you need it. Pry the metal tab up very slightly so that it catches again once you push the pin into place. " - [url]http://www.hidkitswarehouse.com/info.html[/url] [/QUOTE]

Verification

Random media

Kazakhstan

2016 F-350 Lariat "Burnt Flame"

Turkey_Run_035

Picture_268

2013-01-28_22-05-36_978

IMG_20160814_104059556_HDR

FullSizeRender_2_

32A7B95A-0904-45F9-A359-EAC4998EBEB9

Kazakhstan

Engine3

20160806_151030

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 12:33 AM
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Sunday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Sunday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ

Members online

No members online now.

Total: 241 (members: 0, guests: 241)

Top