Reply to thread

Message: [QUOTE="04cr450, post: 1459846, member: 12074"] Playing around with the edge pids and selected the ebp data. What should numbers be 1:1? Because when I get on mine say 1/2 throttle - I will read around 26 psi of boost and 58 psi roughly ebp than it levels out to the same psi as the boost a second or so later. Is this normal for these trucks? Gh tuning race tune full diet etc. Truck runs like a top and only has 3,700 miles on it for reference. I wish we had a dAta "in range" sheet to look off of like the 6.0 trucks have instead of wondering what these pids should be on the 6.7s... frustrating... all this time with these engines and refined tuning and nobody has "safe in spec " numbers to go off of. [/QUOTE]

Verification

Random media

07 door wire

Screenshots 2

2012-08-19_17-15-44_956

track

Wiring diahgrams

The Discovery

20121013_120023

18203_300730386710594_2050796636_n

screenshot_1_

Swamps Timing 1

16879_1325246018845_6898204_n

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 596 (members: 2, guests: 594)

Top