Reply to thread

Message: [QUOTE="dsberman94, post: 1438125, member: 12667"] Welcome. Couple suggestions from me. Step up your injector size some more. Like jomax said, you'll need almost 600hp to not feel 15k lbs. you'll probably blow a stock forged rod motor using it that heavy but something bigger will definitely help you a bit more. Should be able to go up to around 500 on the stock motor though. 175/80 injectors could put you around 400-450 so a little bigger than that on a supporting turbo would work great for you. Not sure where a 200/100 would put you at but probably right where you want to be and be remote tuned fairly easily. Some tuners have had a difficult time tuning the 200% nozzles remotely. I believe KC turbos will be releasing a rebuildable drop in equivalent to the 38r for the obs trucks. That should be relatively soon. A t-4 setup would also benefit you to get to 500hp. Also for your electric fuel system, Quite a few guys have been using the 6.7 power stroke frame rail pump with good results, it also acts as a prefilter so you can get rid of the junk filter in the tank. For a chip, a lot of us on here still run the ts chips but a lot also run the hydra chip for ease of use. Having tunes emailed is a lot simpler than having to ship the chip out and waiting for it to come back. [/QUOTE]

Verification

Random media

20190808_173425

SSBC Brakes

Cg_800

2013-01-01_16-24-47_532_1_

32D740B3-47AA-4D2F-9127-6476D007653B

IMG_20111009_185528

Picture_175

pics

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 427 (members: 0, guests: 427)

Top