Reply to thread

Message: [QUOTE="gutierrez9287, post: 415905, member: 7770"] Well the lines i planned to use are used to on hydraulicly powered presses that are typiacally run 12 hrs a day 6 day a week they basically go from 0-5000 psi spikes all day long im not sure what they are rated for but the pumps could be cranked up significantly higher, so I'm sure they could hold the pressure. I was think more along the lines of NPT to JIC like the hpop cross over line like riff raff makes. Not really using clamps. As far as sizing goes, the lines currently on there are like 1/8" ID or possibly 1/4" ID I was thinking I could go to a 3/8" ID or possibly 1/2" ID since I would be going under and up instead of the already over and thru. My issue is do I really want to drill and tap a hpop to fit a Npt to jic male to male fitting? I appreciate the feed back guy keep the pros and conns coming!!! [/QUOTE]

Verification

Random media

IMG_20130423_193018_237

011

317365_166563960102974_100002481131528_318921_78460406_n

Big_Red4

step_4-1

013

1997 ZF5 DRW

AC gauge

Hydroboost and power steering

20150413_141545

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 551 (members: 0, guests: 551)

Top