Reply to thread

Message: [QUOTE="dmkolb, post: 1058037, member: 12340"] I asked the owner about the dyno while there and he said 7500 lbs rollers. I'm guessing he's right. Lots of guys at the event said his is probably as close to legit numbers as you can get. Several other places are all over the place with numbers but most who dyno often for testing and what not prefer this one. There is no loading on this dyno. They of course can bring the rollers to a stop with a brake but it's not used for loading the dyno. As for the valve stem wear I guess time will tell. I also don't spray all the time as Snow suggested for better MPG. I don't have it even start spraying until 30 psi and it's at full spray at 40 psi. I see boost max around 57 psi. So in a day it may spray once for just a few seconds but I'm not beating on it every day either so some days it doesn't spray at all. I just use it to help keep the EGTs down when there is heavy throttle and on wide open pulls as a power adder. [/QUOTE]

Random media

sealevelSOInumbers

6.7 Ford CCV bypass

step_2

uploadfromtaptalk1320025322225

70b5dc34

IMG_20110829_191404

1995 f350

BD96E951-D6BA-4930-B57B-861923C8984A

Underside Truck Photos

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Yesterday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Friday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current

Members online

No members online now.

Total: 870 (members: 0, guests: 870)

Top