Reply to thread

Message: [QUOTE="prototypemo, post: 1151125, member: 17341"] i unplugged the ebp...it ran worse. and after starting it my icp shot to 1370....then went to high idle and the icp lowered. After the truck got to operating temp the icp settled at 585...its like 35 degrees here. and its never done that before? at high idle my ipr was 43.9 and at low idle it was 22-24...any other sugestions or ideas? to give more info. rebuilt ipr, new icp, cleaned tube and new map, cleaned ebp and tube, ficm every now and then falls to 47.5 but no lower, cleaned maf, new fuel pump and filters. late 04 build so no stc fitting, ball check valve still present in the hpop, new blue spring, cleaned vgt solenoid, egr cooler delete, egr still present but clean and not coked up, think might have stuck vanes but that wouldnt cause it to run poorly would it? my vgt on my scan guage seems to be operating in all ranges, new cac boot as i split one recently, new barometer....I think that about sums it up. everything I read off my scan gauge seems to operating properly. I just have no power on accel. could it be my pcm possibly? the past few days my scanguage would randomly turn itself off and on? thanks in advance for any help guys [/QUOTE]

Verification

Random media

IMG_20140415_194345_701

eleanor_part_two_40_

2011-07-06_22-25-01_636

7_3_2

SSBC Brakes

A_M1

Power for stereo system

New Name Plates

Truck14

elbow_1

5733

Latest posts

Won’t start issues
- Latest: psduser1
- Yesterday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Yesterday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Yesterday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Yesterday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

DaveinIowa

Total: 319 (members: 1, guests: 318)

Top