Reply to thread

Message: [QUOTE="72ford250, post: 1411592, member: 12750"] Ok guys I am getting slightly frustrated with this truck. So anyways I bought a honey badger jr to replace the t500 as I thought I needed a little more flow. So before I took the t500 off I could hit around 2400 with 35% without turning. Next came the first Jr hpop it could hit 2200 with a 75% ipr and a DD tune from dyno proven. So I pushed for a replacement pump and got it this new Jr can do 2300-2400 with a 55% ipr as long as I ease into the accelerator pedal. So this comes down to a problem on my end I must have a internal leak. I have used a porta power to pressure each head. You can build to 3,000 psi and it takes about a minute or two to bleed off to 1000 psi is this normal? All upper o-rings on the injectors except one that I fixed seem to not be leaking when I dead head the hpop by giving the ipr 12v and cranking on the engine. Is it possible these rosewoods 160/80 with maybe 30,000 on them have bad internal o-rings? Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

truck110

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

IMAG0133_1_

2011-07-28_17-24-25_31

08_xl_front_left

for sale

RS9000XL's

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

DEEZUZ

Total: 516 (members: 1, guests: 515)

Top