Reply to thread

Message: [QUOTE="Vader's Fury, post: 673657, member: 473"] New ICP sensor and IPR. Installed today. When driving it drives great for a few mins then I get a P1209 and P1211 code and the truck falls on its face. Will not accelerate and just kinda limps along. If I shut the truck off and restart, it will do the same thing. Run great for a few mins then right back to this. I checked ICP pressure and it will go up to about 1500 quickly then level out there and drop back to 1200 or so and hover there. DC climbs to 50% or so and that is all. I didn't have my ohm meter with me so I Didn't check the harness but I do not see any bad spots or broken wires just from a visual check. When idling I get about 500-550 icp and 5% dc. I know this is lower than it should be. When I unplug the icp sensor, It jumps up to 700-750# and 14% dc. This is much better. Any idea's? Like I said I plan to bring my meter with me tomorrow and ohm out the harness and see if I have a short but any other idea's? [/QUOTE]

Verification

Random media

photo_25

DE_4_DP

FullSizeRender2

maple_grove_013

2011-05-31_17-20-35_79

20180115_080954

Superduty

sam_and_her_truck

0101

Latest posts

S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Today at 9:45 AM
6.7 Tech & FAQ
T
6.4
- Latest: Tkb6.7
- Yesterday at 11:19 PM
Newly Enlisted
S
6R140 surging issue
- Latest: Smokin 6.0
- Wednesday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Wednesday at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Tuesday at 9:10 PM
7.3 Aftermarket

Members online

No members online now.

Total: 596 (members: 0, guests: 596)

Top