Reply to thread

Message: [QUOTE="Magnum PD, post: 906845, member: 420"] I was bound and determined to use the stock valve tank selector so I could use both tanks. I knew the drawbacks. But after reading the article in DP magazine when they went from 238/100's to 300/200's along with the S467 and gained minimal HP because of the stock fuel tank system, I knew I had to get a 5/8" pickup tube. Still not wanting to give up the rear tank, (front one is already off) I wanted to see if there was SOME way to use the rear tank. Got to thinking and I could use the stock lines from rear tank to plumb it into a small electric pump and to pump fuel into the stock 3/8" supply line. Wiring is something I could use some help on. Since the harness for the selector valve would not be used, could I use a hot wire from that harness to run the pump when I switch to the rear tank or is there no hot wire on that harness? [/QUOTE]

Verification

Random media

002

past & present

IMG_20120303_163545

6697217-57f3ea2d22b6b

The Discovery

iphone_pics_710

IMG_20150819_230121757_1_

raptor8

front_axle_swap4

08 6.4 Parts

Latest posts

S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 1:51 PM
6.7 Tech & FAQ
S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Yesterday at 1:51 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- May 22, 2025
6.4 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 376 (members: 0, guests: 376)

Top