Reply to thread

Message: [QUOTE="JCart, post: 1531377, member: 1238"] Pondered this as well. I have a 12 or 15,000 lb Ramsey with steel line on it. Came with one of my trucks and I took it off as I never liked the DIY bumper. Was thinking about adding two 2” receivers front and back for a total of 3 per each end of truck. Then put the winch on a plate with fairlead that slides into the receivers. In this way you can choose which end and when not in use toss in the box. Rationale for 3 receivers is if you have to pull at an angle, spread the load without wrecking receiver. The downside, Ramsey is brutally heavy and would have to switch to synthetic line. Also I own a Honda Pioneer 500 side by side rather then beating up the pet truck the P5 gets it. Solid mount would be heavy and I feel hard on the front end. Lastly, because of the side by side, I’ve not been stuck (with truck) for years.... and most guys with winches end up yanking buddies out and mashing gear. Cheers, j [/QUOTE]

Verification

Random media

Balance Masters

IMG_3517_1_

Grab pillars

Weight Reduction,one part at a time

side-1

TNC_F350_KR_with_8x14_Loadtrail_Trailer_725_gallon_water_tank

O&G's 2011 F250 Journey

20140221_181947

IMAG1039

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 462 (members: 0, guests: 462)

Top