Reply to thread

Message: [QUOTE="aceltx, post: 1244476, member: 18658"] You guys gonna have a laugh at this question but...hpop is mounted under fuel bowl correct? If it is what I think it is, all dry, front part of valley is completely dry, checked all the braided hoses goin into covers, dry no leaks. Now that I have about 200 miles on truck after turbo and pedestal install, i believe the leak I originally posted in this link is fixed, i had the valley so clean you could eat off it. No oil in the back of valley anymore. It must have been EBPV or the bottom of pedestal. What I have now or maybe its the same thing Im chasin from before but now everything is clean, In the middle of the valley a little behind X pipe, it is wet, i cant tell if its oil or fuel cause its not puddling i scraped it with a rag taped to end of screwdriver i cant tell. But there is no sign of it on the sides leaking down to middle of valley. Kind of feel like its getting pushed by the rubber boots cause i have some oil inside IC pipes,most likely from ccv vent. [/QUOTE]

Verification

Random media

Trucksetup

Backglass

09 6.4

rear_axle_3_

20161115_132613

IMG_20140526_224842_550

FullSizeRender_2_

IMG_20140823_185632_160

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 366 (members: 0, guests: 366)

Top