Reply to thread

Message: [QUOTE="Dirtclod, post: 1499334, member: 20061"] Well that valve cover gasket on drivers side rear bolt was A€>~# &#55357;&#56865;&#55357;&#56865;&#55357;&#56865; After removal and unplugged harness connector on the inside of valve cover and plugged back in the results were 1.9 all four. Back under the hood I moved wires a little broke small tie tie wraps and separated wires results were 2.9 on all four! &#55357;&#56842;&#55357;&#56842;&#55357;&#56842;&#55357;&#56842;. So that one should be fine after new gasket and harness. I also moved the plug on passengers side and readings were better than before with 2-3 points variation. Between 2.5&3.1. So it looks like the harness on both sides are the culprit. Both the power feeds to both sides read open and so did shield. I'll report back when all is finished with a final result. [/QUOTE]

Verification

Random media

IMG_20150122_121625_584

IMAG0133

excursion_lake

1b555080

Fire

New_Image56

0038

IMG_20120303_163545

IMG_20170714_182636

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 449 (members: 0, guests: 449)

Top