Reply to thread

Message: [QUOTE="TARM, post: 474287, member: 578"] Honestly unless this is something SEVERE sounding like bent valve or push rod sounding, as there are misses then there are MISSES, I would run it for 50 miles and see if it goes away after that drive. But then for me that is just going to the closest grocery store and back LOL. But if its really bugging you why not make a video of the engine running and get the opinions of those on here. If you will feel better testing things out some a sure fire way to rule out the electrical side of things is to OHM out the harness from the IDM connector. Pull the wheel well cover and unhook the IDM. Then with all the injectors and all plugged in ohm out all the pin outs from the IDM connector. This will cover the entire system from IDM to injectors. Its up to you. [/QUOTE]

Verification

Random media

donor_harness_1_

My truck

2011-07-06_22-25-01_636

my stufff

my truck!

Close up of grille

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

IMG_20130423_192721_897

photo1-1

My first pics

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Today at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Today at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

Total: 1,082 (members: 2, guests: 1,080)

Top