Reply to thread

Message: [QUOTE="firehunter, post: 1086071, member: 1162"] Fuel was coming out from the downpipe to turbo connection. It does not seal perfectly when it is cool but seals good when warm. I had a tighter fit in the past but when the turbo got warm while pulling it actually broke the clamp. I did the straight edge when I installed them. All of the old coppers were accounted for. I won't be able to pull the injectors for at least a week as we were headed out of town with the horses. I have been in phone contact with the vendor, got a return phone call this morning, they are interested in making it right even if it turns out to be my oops on the install. Good stuff. [/QUOTE]

Verification

Random media

White Out

1911

BW_362_sx-e_175-30_injectors

Wreck4

John Deere X728

03 7.3 ZF6

PART951319154316768

Latest posts

L
LPOP specs?
- Latest: LurkerX
- Thursday at 9:02 AM
7.3 Tech
Ford 7.3 Low/No Boost/HPOP?
- Latest: psduser1
- Jul 19, 2026
7.3 Tech
Berman's 7.3 build
- Latest: dsberman94
- Jul 16, 2026
Project Forum
2003 F250 4X4 6.0 Ball Joints
- Latest: DEEZUZ
- Jul 15, 2026
Suspension, Drive Train, and Tires
F
Hub/Bearing Assembly Delima
- Latest: FXR99
- Jul 15, 2026
6.0 Tech

Members online

Patrick Feeley

Total: 4,584 (members: 1, guests: 4,583)

Top