Reply to thread

Message: [QUOTE="TARM, post: 334888, member: 578"] I can without a doubt state that sometimes there is NO way you can physically press hard enough to get a injector with brand new o-rings to seat. I am not even remotely close to being a small guy and even the number #2 which is plenty easy to get all your weigh onto would not go in. It took a number of firm hits with a dead-blow hammer. BTW a dead-blow hammer is what you want to use IMO. You can lay a piece of rubber mat over it if you want. But hitting it flat with a dead blow creates more of a hard shove than the sharp shock a normal hammer does even using wood or the bounce and off angled deflection a rubber mallet does. Now by all means if they go in with physical pushing force that is the way to go. If you wanted to take some time you could rig something up that would allow a flat bar with a threaded hole with a bolt head that a socket fits to and actually pushes on the injectors solenoid top using threaded holes in the head at anchor points. [/QUOTE]

Verification

Random media

2017 Headliner Re-Do

baja_rack_PIC_

17King1

0022

my truck!

20161122_112103

0112or_01_z_2001_ford_f250_super_duty_4wd_offroading_front_top_view

IMG_20170819_224359179

Punisher_s_1st_Photo_shoot_025

1308247057569

IMG_20170812_160934213

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Mknp84

Total: 575 (members: 2, guests: 573)

Top