Reply to thread

Message: [QUOTE="SamW, post: 319534, member: 5564"] Dont even bother. If there is only 1000 miles on it you should be good to install. Not a bad idea to replace the copper compression washers on the bottom of the injectors. If you use a deep 8mm socket to slide the new washer back on the injector that works really well. Might as well replace the orings on them too for piece of mind. You can get those from ford. It is really straight forward to do it yourself too if you have a weekend free. [/QUOTE]

Verification

Random media

Backglass

Screen_shot_2012-01-29_at_8_37_29_AM

DSC06940b

6_7_intercooler

cleaning_axles

pistons

1st_gear_converter_lock

76,000 lbs loaded tanker... no problem..

62A8E61B-3734-4767-B2AC-1BD622460703

1907416_10153176647903050_1784625645173662230_n

20170502_2124271

Latest posts

OEM LED sport headlights
- Latest: ghohouston
- 21 minutes ago
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Sunday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Sunday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ

Members online

Total: 223 (members: 2, guests: 221)

Top