Reply to thread

Message: [QUOTE="Hotrodtractor, post: 1160534, member: 25"] You state that you have an oil leak? where is that at - it could be a contributing factor to the long starts. You reused several components that could also be contributing to long starts and choppy running (injectors, injector o-rings, HPOP, IPR, etc...) - these same components that could be failed might have also caused your significant amounts of blow by. Big Bore's comment comes more from a diagnostic troubleshooting perspective then anything else. Oil blowing out of the dipstick could be cause by lots of things other than blow by.... like a plugged CCV or overfilled oil or overfilled oil because of fuel dilution because of bad o-rings on the injectors that are also causing the long starts and choppy running. You really haven't given us anything other than a bogus ICP number to go off of. [/QUOTE]

Verification

Random media

motor

IMG_20130401_210500_864

photo-6

Magneto_rear

IMAG0697_1_

What_UNBROKEN_thinks_if_it

Birds eye view of the beast

My OBS E-Fuel system

TowF250

97 psd

cleaning_axles_2_

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Patrick Feeley

Total: 798 (members: 1, guests: 797)

Top