installed super duty starter

[sparksf250]

I put one of these babies in last night Holy crap!!!! My truck has NEVER started this fast, even after installing new starters in the past. I would suggest this to anyone that needs a starter you will thank yourself

 

[Tom S]

Which one did you get and from where?

 

[purpleheart350]

did you have to modify anything or did it go right in?

 

[StrokerTurbo7.3]

Which one did you get and from where?

did you have to modify anything or did it go right in?

:whs:

 

[Clouse2411]

I put one in my truck awhile ago. I just got mine from Autozone cause I was in a hurry. I think the only thing I had to do was drill out one hole in a wire connector to fit over the stud.

 

[sparksf250]

I got mine at Advanced was in a hurry too since my truck was sitting in the parking lot at work not startable hahaha. I think it was the Reamy that I got.

 

[Cat_rebel]

Got mine from Auto Zone for a 00, installed it in a blizzard in a parking lot. Used a pocket knife to open the hole for the small wire on the starter. Cranks over fast & his a lifetime warranty.

This is a 32° cold start-

http://www.youtube.com/watch?v=6xWqp4ljCzw

 

[Tom S]

I have the DB on mine with no issues so far. Mine is an older one before guys started reporting problems.

 

[old man dave]

The SD starter is half the price and the only changes are the SD starter only uses two bolts instead of three to mount and you need to get a M6 flange nut and ream the existing wiring lug out to fit. Otherwise, you do what I did, go to the hardware store just for a 20 cent nut. The old OBS starter stud is a M5. I bought a SD starter (did not come with a M6 nut) from the dealer and asked for a 02-03 7.3 starter. I have a DB as a spare but don't know if its one of the good ones or the later not so good ones.