Reply to thread

Message: [QUOTE="TARM, post: 298454, member: 578"] The soleniod is held on by that sheet metal nut at the end of the IPR. That nut is likely not tightened down enough. Make sure it is good and snug but not over tight as its a thin sheet metal nut. If it comes off the engine will idle like crap, sputter on take off and die off and on near or at idle. If it keeps coming loose replace the nut and maybe add some purple loctite to the threads. When you pull one while the HPOP is on the engine you take that nut off then the sleeve and solenoid side off. Then you can use a 29mm Deep sock to get the main body unscrewed from the HPOP. The top nut is 3/4" IIRC. [/QUOTE]

Verification

Random media

Electric fuel

train_wreck

16349_685490491532570_5454867697180878287_n

'99 F250

296177_10150345342119170_235203259169_7912046_508099034_n

9131DB15-CDA0-4EE0-8BC9-8E7AD1DA6C39

7547408_400x300

2011-10-29_10-39-17_621-1

11T0007_2011_FORD_F250_Manufacturers_View

B440560A-CFF0-41C1-9C01-0F60F3EDDDFC

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Friday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Jun 2, 2025
Aftermarket Super Duty 1999 - Current

Members online

No members online now.

Total: 1,386 (members: 0, guests: 1,386)

Top