Reply to thread

Message: [QUOTE="Tim @ P.I.S., post: 1084988, member: 744"] Those that purchased from us and had this problem we have been aware and are trying our best to correct the issue. This was a vendor poor QC issue that we unfortunately did not show itself until the final product made it to the hands of our customers. We have since switched solely to Alliant Power brand o rings for all future use. We had used the same supplier since 2005 with no prior issues. Unfortunately things do happen in the manufacturing business. This was completely out of our control, but we are doing everything we can within reason to correct this. All the sets have been replaced that we are aware of with new Alliant Power brand o rings. The best advice I can give to anyone regardless of being our customer or someone else's, REPLACE the metal ring! Unfortunately the vendor has not helped much in this situation and we believe the metal ring is the root of the issue. Not exactly an o ring material issue. This was a batch that we have pretty well isolated the sale dates on and I do believe everyone that has had this issue has contacted us. Billy I believe you spoke to David on Friday. He should have a set of o rings headed your way. I personally apologize for any inconvenience anyone has had. This has definitely been a major pita and not a cheap one at that for anyone. We (P.I.S.) have always strived to offer the best product available to the market. This has been a stain on a very good record we have keep. Customer service is only second in my book to product quality. If by chance you have had this issue and have not spoken to us please feel free to PM, email or call us. [/QUOTE]