Reply to thread

Message: [QUOTE="Jason, post: 955246, member: 430"] Throw a jack under the front end of the truck, and use a large level, placed under the cab, under the door like wherea step would mount. That's the most level/straight part of the truck. Get that leveled off...then put it on the bed. See how far off centered it is, take measurements from the front corner and rear corner. If it's a 1/4" higher in the front..you know how much needs to be fixed. Be much easier that way. That's how we leveled my '02..by using a level on the top of the bed, right behind the cab. Bastard was just barely like 1/32 off center, to the front with a leveling kit and f350 blocks (i used a 99 dually 4x4 vin number). [/QUOTE]

Verification

Random media

6_4Hopper

IMG_20130417_183541_808

vgt turbo functions

61362_3996693163914_836629202_n

0041

IMG_20150506_232110327

6.0 nozzles

20140901_175315

2013-01-06_17-11-35_447

2012-09-07_20-40-07_144

Latest posts

Hard steer question/issue
- Latest: psduser1
- Yesterday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Yesterday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- May 30, 2025
6.7 Tech & FAQ

Members online

JSchuricht

Total: 1,010 (members: 1, guests: 1,009)

Top