Reply to thread

Message: [QUOTE="mattymx, post: 33638, member: 1237"] Jet fuel can be run in the HEUI PSD's with out any worries as long as you add lubrication to the fuel. I have used it in my trucks with 2ounces of 2 stroke premix per gallon of Jet-A. The fuel was free so I went for it. If I were having to pay for the Jet-A, I would not bother getting any. Jet-a has a lower BTU content than pure #2 and you will see a decrease in MPG's. nothing too drastic, but I did see a good 20% loss in MPG. Running Jet-A in a 6.4 or 6.7 PSD is something I have no experience with and will not advise or warn against. While the CR system is made for ULSD, Jet-A is even drier and I dont know the if the CR pump or the exhaust system can handle the oil needed to lubricate the fuel..... [/QUOTE]

Verification

Random media

dualIPR

20170106_170559

step_2

Cobalts

Fall_Pic

6.4 powestroke fluidampr

DSCN3559

ar2

20170502_2125491

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

projectford

Total: 499 (members: 1, guests: 498)

Top