Reply to thread

Message: [QUOTE="nighthawk285, post: 1369395, member: 13975"] What these guys said......if you want all around throttle response and power, don't go any bigger than a S2 with stock sticks.....hell even with bigger injectors sometimes it takes a little bit to get the S3s spinning. Your temps high in the revs would be fine, but you'd run really hot and smokey when you're under the turbo. As far as your injector question yes you can have the injectors in there now modded. Your truck will just be down between the time you send them out and get back. Side note.....are you really set up on using a Stage 3? Are there any supporting mods done to the truck to help feed bigger injectors and hold together the bigger power? I wouldn't do anything until the truck is studded at least, or else you're pretty much sitting on borrowed time....especially if you start upgrading turbos and upsizing injectors on the stock head bolts. [/QUOTE]

Verification

Random media

Boat1

296177_10150345342119170_235203259169_7912046_508099034_n

b4a9f0e31

4wheeler

2012-07-08_18-47-05_287

Got in a tornado with my new pick up!

My 03 F350

eleanor_part_two_70_

20200531_191412

20200209_165857

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 8:29 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

LivinAnAdvntr

Total: 532 (members: 2, guests: 530)

Top