Reply to thread

Message: [QUOTE="jgill, post: 642961, member: 10782"] Alright, recently installed a few new goodies. Started with just simple deletes and H&S mini maxx, and recently had coolant issues and cracked up pipes. So i ordered studs and gaskets from rudys and a wastegate and downpipe from gabe at venom diesel, wastegate was outsourced to MPD and they put together a great kit. So now to the problem, lifted the cab to do install and everything came apart and went back together the exact same way with all new gaskets from ford. Dropped the cab and started the truck and no boost at all, figured it was the MAP sensor so i went and got one along with an IAT2 sensor to do while i was there. That helped but now im only seeing 14 pounds of boost at WOT and my EGT's are climbing at a ungodly rate of speed and the tuck stays hot. EBP is around 2 at idle and seems normal as throttle increases and all fuel pressure seems to be normal. Seems to me that im hearing LP turbo spool and HP turbo isnt spooling at all but i may be wrong. Gonna look tomorrow and see if turbo is spinning at all. Any insight on this would be great. And maybe a little direction on adjustment of wastegate. I appreciate all the help i can get. [/QUOTE]

Random media

eleanor_part_two_34_

63 Unibody F100

163672_134264049970590_100001609875209_226197_1386311_n

Grab pillars

20150413_192754

Alexis

phone_pics_065

backside of air filter

08 bucket seat panel trim

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Wednesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Patrick Feeley

Total: 312 (members: 1, guests: 311)

Top