Reply to thread

Message: [QUOTE="RSK, post: 940253, member: 13279"] [ATTACH=full]131001[/ATTACH] connect the driver box to the actual bulb which is super easy and only fits one way, then plug the driver box into existing wiring harness and twist bulb into factory housing and apply double sided tape to location of your choice to mount the drive box, and install the 4 bolts to re attach headlight housings and one side is done, repeat for the other side and enjoy your new lights. [ATTACH=full]131002[/ATTACH] stock head lights. [ATTACH=full]131003[/ATTACH] Led head lights only. [ATTACH=full]131004[/ATTACH] that's a little over 100' away with both the rigid dually led fog lights on and the led head lights on... [ATTACH=full]131005[/ATTACH] head lights [ATTACH=full]131006[/ATTACH] [ATTACH=full]131007[/ATTACH] both overall they are bright, and match the fog lights very well, much better then the stock head lights. [/QUOTE]

Verification

Random media

IMAG00113

2005

drill1

IMG_20130328_194125_228

exit_2_5

EDGE Insight CTS - Cheap Insurance

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

ghohouston

Total: 407 (members: 1, guests: 406)

Top