Reply to thread

Message: [QUOTE="Tim @ P.I.S., post: 165663, member: 744"] The 125-220 was the range the whole set didlowest to highest). And yes at any given point as long as there is enough PW to work with the nozzle size they should have done 250cc across the board. I was quite surprised myself. Once PW is reduced to the point it can not support the nozzle size then yes all injectors will start to reduce output. The limits I found were the amount of PW the IDM will support at a given RPM. This will give you the info you need to design the injector. And to help in the tuning of the injectors. A flow chart for a set of injectors means nothing if RPM is not a variable in the equation. [/QUOTE]

Verification

Random media

2012 f250 sagging

IMAG0069

Target practice

for sale

O&G's 2011 F250 Journey

IMAG0315_1

1308247057569

F5C3B40A-49B9-4D3F-A171-8E4E8ED2C13A

photo_8_2

iphone_pics_044

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Powerstroke Cowboy

Total: 914 (members: 1, guests: 913)

Top