Reply to thread

Message: [QUOTE="SpartanDieselTech, post: 1291425, member: 22311"] 1400 is as high as you need to go. Keep in mind that torque number is simply getting passed along to other tables as an axis normalizer. If the other tables max out at 1300 or 1400, the ECM will not interpolate any further than those values. Since the actual outputs (VGT, injection pulsewidth, injection pressure) end normalization at 1400nm, any value 1400nm or higher will drive the ECM to the end of those tables. If those tables end at 1400, then the actual pulsewidth (or other given parameter) will only go to the bottom row/column. Changing it to 1500 or higher will have no actual effect. [/QUOTE]

Verification

Random media

user123603_pic33578_1373077410_thumb

2010 bed

IMG_20130322_200836_402

Relay plug

Dual IPRs

20979996117_ORIG

58AE18E8-A641-4EB1-85AE-DCDD0F020142

IMAG1090

Latest posts

2000 f350 dually lariat
- Latest: ju015dd
- Today at 12:37 PM
7.3 Aftermarket
I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 968 (members: 1, guests: 967)

Top