Reply to thread

Message: [QUOTE="kleake, post: 1524057, member: 25987"] Got a few thousand miles on the full rebuild and starting to hear 1 cyl with low compression. As you crank it to start, if it hits that cyl you can hear an obvious low compression. When idling, it sounds like just a weak cyl, but while driving it all runs fine and you don't feel or hear any miss. I'm wondering if I have a valve that isn't seating all the way. Usually as things wear in, things get better, but this is definitely getting worse. Any quick things I should look at before assuming a valve issue and removal of the heads is in the cards again? I'm really getting tired of pulling the heads, this will make the 4th time in about 2 years if I have to do it. [/QUOTE]

Verification

Random media

08 350 cclb white

Favorite past time

DP-Tuner Timing

OUO 525

uploadfromtaptalk1320025351052

2012 f250 sagging

side_2_coppy

023

Latest posts

2010 headunit
- Latest: glog
- Today at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 371 (members: 0, guests: 371)

Top