Reply to thread

Message: [QUOTE="EPA, post: 1541330, member: 31205"] You want it pitched up... Pinion pointing toward the trans not the ground. Pitched down is the worst thing you can do for angle. The trans is 6 degrees pointed down... The pinion need 5 up. If you draw straight lines from the pinion and follow its angle and do the same for the output shaft you dont ever want the 2 lines to cross they should run parallel to each other.And again also check for slop in the tail shaft bushing. If its pointing downward 1 degree without shims use the 6 degree shim to point it up... That will give you the 5 up. I should have specified the direction last night. [/QUOTE]

Verification

Random media

Picture_040

5721

FullSizeRender1

300K

Snapchat-20140602093945

AD2_2_

IMG_20170126_163545549

IMAG1370

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 706 (members: 1, guests: 705)

Top