Reply to thread

Message: [QUOTE="bismic, post: 1538128, member: 1537"] Do you have oil pressure on your dash gauge when cranking? Try cranking w/ the oil filter cap off and the filter out. The filter bowl should fill in 8-10 seconds. Is your oil filter cap an OEM cap? The height of the OEM oil filter cap is about an inch above the housing when it is installed. Aftermarket ones are substantially taller. When you changed the screen on the IPR, did you make sure it wasn't stuck open w/ debris inside of it? Did you actuate it to see if it moved? Did you install a new screen in the sump under the oil cooler and did you flush between the oil cooler and the HPOP oil inlet? Did the old HPOP fail or did you just upgrade to the Dieselsite HPOP? [/QUOTE]

Verification

Random media

Photo_Sep_24_5_57_00_PM

jesus

heads_on

523864e1

2013-03-29_11-53-34_365

DSCF0881

SprintPhoto_ccprys

9997c7e9

uploadfromtaptalk1320025351052

5744

Latest posts

D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Today at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Today at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty

Members online

Patrick Feeley

Total: 620 (members: 1, guests: 619)

Top